Control Units

General Features

  • Diesel and gas generator support
  • 400Hz generator support
  • 400x measurement-valued event recording
  • All parameters can be changed from the front panel
  • 3 level program password
  • 128×64 pixel graphic LCD
  • Language installation
  • Current-voltage waveform
  • Current-voltage harmonic analysis
  • 16 Amp / 250V CC / JK outputs
  • 8 programmed digital inputs
  • Entries can be increased to 40
  • 8 programmed digital outputs
  • Outlets can be increased to 40
  • 4 programmed analog inputs
  • CANBUS-J1939 & MPU input
  • 3 programmed service alarms
  • Multiple self-test programs
  • Weekly work schedule
  • Dual generator support,
  • Evenly aged
  • Fine speed adjustment (some ECUs)
  • Automatic fuel pump control
  • Protections cancel feature
  • Over power Protection
  • Reverse Power Protection
  • Overcurrent IDMT protection
  • Load shedding, dummy load
  • Multiple load shedding programs
  • Current unbalance protection
  • Voltage unbalance protection
  • Refueling and fuel theft alarms
  • Battery-backed real time clock
  • Idle speed control
  • Battery charging operation
  • Battle mode support
  • Multiple Nominal Conditions
  • Contactor+motorized switch driving
  • 4-quarter energy meters
  • Grid energy meters
  • Refueling meter
  • Fuel consumption meter
  • Modem & ethernet pages
  • Parameter setting via
  • USB, RS-485, Ethernet and GPRS
  • Free configuration software
  • Control via SMS
  • Ready for centralized monitoring over Ethernet and GPRS
  • Mobile Generator Support
  • Automatic GSM geolocation
  • GPS connection (USB and RS232)
  • Software download via USB
  • IP65 protection with standard gasket
smart-500

Measurement

  • Mains and gens. FN – FF voltages
  • Mains and generator frequency
  • Mains and generator phase currents
  • Mains and generator neutral currents
  • Mains and generator, phase and total, kW, kVA, kVAr, cos
  • Excessive and low engine speed
  • Battery Voltage

I/O's

  • 4-band GPRS modem (optional)
  • USB Host and USB Device
  • RS-485 (2400-115200baud)
  • RS-232 (2400-115200baud)
  • J1939-CANBUS
    Location determination over GSM
  • GPS connection (USB and RS-232)
  • Monitoring from Internet Center
  • Send Sms
  • Sending Mail
  • Free software: Rainbow Plus
  • Modbus RTU and
  • Modbus TCP/IP

Functions

  • AMF device (seamless transition)
  • ATS device (seamless transit)
  • Remote Start Control
  • Manual Start Control
  • Motor Controller
  • Input-output boosting
  • Current-voltage harmonic analysis
  • Long-term recording in flash memory

Connections

  • 3 phase 4 wire, star & delta
  • 3 phase 3 wire, 2 Current Transformer
  • 2 phase 3 wire
  • 1 phase 2 wires

Datakom SMART 200

smart-200

Datakom D 500

Datakom D 500-GSM

datakom-d500

DeapSea 6120

dse-6120

DeapSea 7320

dse-7320

ComAp AMF25

comap-amf25
 Datakom SMART 200Datakom SMART500-MK2Datakom D500Datakom D500-GSMDEEPSEA 6120DEEPSEA 7320ComAp AMF25
OTOMATİK ŞEBEKE TAKİP
MANUEL ÇALIŞTIRMA
UZAK ÇALIŞTIRMA
SİM KART İLE UZAKTAN İZLEMEOPSİYONELOPSİYONELOPSİYONELOPSİYONELOPSİYONEL
EKSTRA 1 ADET OPSİYON (KORNA,YAĞ-YAKIT ISITICI VB.)OPSİYONELOPSİYONELOPSİYONELOPSİYONELOPSİYONELOPSİYONEL
IŞIKLI İKAZ VE MİMİK DİYAGRAM
AKÜ ŞARJ REDRESÖRÜ
RS-485 HABERLEŞMEOPSİYONELOPSİYONELOPSİYONEL
ETHERNET (TCP-IP) HABERLEŞMEOPSİYONELOPSİYONEL
DETAILED INFORMATION​

Detailed Information About Products​​​​

You can fill out the form about the product you want to get information about and contact our expert technical team.